Using the thermometer:
1,Use one 1.5 volt, AAA battery
2,Push the TIMERTHERMO to THERMO
3,The thermo-temp. and set temp. will be displayed
The thermo-temp. is showing the current temperature.
The thermo-temp. is showing set temperature for alarm function.
4, The default set-temp. is 50C. Use the UP or DOWN button to set the proper temperature
To desrease the set-temp.press DOWN
To increase the set-tem.press UP
Hold the DOWN or UP button down for a fast decrement or increment.
5, If you have set a Worong temperature, simply press DOWN and UP simulaneously to reset
6, Press the START button once, the alarm stand-by mode will replace the setting mode
7, The alarm will sound when the THERMO-TEMP. reaches the SET-TEMP.
8, Press STOP button once to stop the alarm. Temp. Range: -50C~300C (-58F~572F)
Using the TIMER
The timer is used to keep track of your setting time in hours, minutes, and /or seconds
1,Push the TIMER-THERMO button to the TIMER. The setting mode will be displayed.
2,Press the MIN and SEC buttons simultaneously to reset.(You may repeat this step anytime to stop or reset the unit.)
3,Use the MIN and SEC buttons to set the time. Press MIN to set minutes and/or hous. Press SEC to set seconds.
4,If you have set a wrong time,reset( see setp 2)
5,if you have set the correct time, press the START button once.
Note: Once the time has been set,DO Not push the TIMER-THERMO button, since it will cancel the set time.
6,The timer will sound when it cpunts down to 00:00:00
7,Press the STOP button once to stop the alarm.
8,The unit will return to its pre-set position. You may reset the unit or start again
9,1.1 Meter Sensor wire
10,Working temperature range for the body.(0C~50C. 32F~122F )
11,Please do not surpass 300C above object with this test
Size：79*75*17mm
Weight ：110g
Error degree：±1℃
Precision：0.1℃
Temperature range：-50℃ ~300℃
Power supply：1.5V（AAA）Seventh battery×1 Temperature Alarm Positive/Negative-timer |
