Email us : sales@ddmeter.com
|
Categories
Homebrew
Brewing Other Accessories Home > Brewing Kits > Brewing Other Accessories
HB-WSG 11
  • HB-WSG 11

HB-WSG 11"/16"/20" Weldless Sight Gauge Stainless Steel PC Tube High Temp 7/8"Hole Homebrew Kettle/Keg

Item No.: HB-WSG11, HB-WSG16, HB-WSG20
INQUIRY

11"(HB-WSG11)/16"(HB-WSG16)/20"(HB-WSG20) Weldless Sight Gauge PC Tube

This is an affordable sight gauge and it inlcude all fittings needed to install into a brew kettle. 

 

Feature:

Easy to install. Just drill a 7/8"(22mm) hole in the kettle.

It is easy to cut to the exact length with a pipe cutter taking small adjustments at a time or simply by using a table saw or hacksaw.

Three different length of PC tubing available.

The eye bolt allows you to attach the sight tube to your kettle. You will need a 1/4" drill bit and drill to do this. 

The sight gauge vinyl numbers(2-20) are for using on your sight gauges as graduation marks and measure.

 

Weldless Sight Gauge Includes:

1. 304SS Elbow *1

2. 11"(16"/20") Poly-Carbonate Tubing *1

3. Set of Vinyl Graduation Stickers(2-20) *1

4. 304SS 1/2"Comperssion x 1/2"MPT * 1

5. Silicone 1/2" O-ring *2

6. 304 Stainless Steel Close Nipple *1

7. Silicone 1/2"NPT O-ring * 2

8. 7/8" SS Washer *1

9. 1/2"NPS Lock Nut *1

10. Eye Bolt *1

 

Cleaning Your Sight Tube:

A simple occasional light cleaning with your favorite cleaner and a 3/8" nylon hose brush is all you need to do. See option below if you don't already have one.
If you are doing deep cleaning of more than 30 minutes, it is recommended to remove the sight gauge and install a hole plug during this cleaning period because extended contact of cleaning detergents could cause the poly-carbonate to crack.
 
Note:
Avoid direct flame contact and use a heat shield if necessary to avoid excessive heat to your sight gauge, the poly-carbonate tubing has a  rating of up to 250 Fahrenheit (120 Celsius). Paying attention to  avoid both of these will increase the life of your sight gauge for many brews!
 

23456