| Function: |
-
When power on, the screen display for 1 second, backlight lit for 1 second, and accompanied by "DI" sound into the normal state, LCD display shows 00:00 with "M" & "S".
-
In the initial state, LCD display shows 00:00 and with "M" & "S". Press START/STOP button to go directly to the count up mode, with "M" & "S" flashing, followed by increments of time.
-
In the initial state, LCD display shows 00:00 and with "M" & "S". Press MIN/ SEC button to set the countdown Min and Sec, and hold the key to rapid increase. After the set up is completed, press the START/STOP button to start the count down. "M"& "S" flashing, followed by decreasing the time.
-
In the timing mode, press START/STOP button to pause the timer. Press the START/STOP button again to continue.
-
In the timing state or stop state, the time will reset to 00:00 if Min and Sec are presses simultaneously.
-
When the count down timer reaches 00:00, there is 30 seconds alarm, press any key to stop the alarm and turn off the backlight.
-
Press MIN and SEC key, backlight for 5 seconds, press START/STOP button, backlight light for 30 seconds.
|