Description:
This instrument is widely used in the laboratories of major colleges
evironmental protections,scientific,research,public health, epidemic
provention, petrolum,metallurgy, chemical industry, medical and so on. The laboratories must have the ideal tool to greatly enhance the efficiency of the experimental staff.
Features:
The machine uses permanent magnet DC motor, no-load can be operated more than 10, 000 hours continuously. The instrument performance is good, no noise, no vibration, mixing results are obvious, for laboratory staff, providing a more ideal tool. This machine is cold Rolled plate touch welding forming. The outer surface of high temperature spray enhance the corrosion resistance.
Specification:
Product name：Magnetic Heating Stirrer
Power supply: 220V 50HZ
Motor speed: starting-2400r/min(stepless adjustable
Motor power: 25W
Hot -wire- power: 300w
Heating: 200CC solutions at room temperature of 20℃, heat 8 minute or so, usually ranging from 90℃
Package included:
1Pc x Magnetic Heating Stirrer
1Pc x User Manual
1Pc x Power Cable
How to use
Using this instrument before, first, check whether the attached accessories complete, and put the the beaker required mixing on the centerof blender board,add solution to the beaker and put the mixer in it.
Then, plug the power device; connected to the power and open the power switch, indicator light that is to work.. Just open the heating switch to the heated stirring, with no mixing, when not heated. There is slow speed to fast (files do not allow fast start, avoid the mixer to jump).Cut off the power when no-working.
To ensure safety, plug in the ground, and the equipment should be kept clean and dry,non -solution into the machine in order to avoid damage to parts.
Note:
1. Found the mixer submixing or jumping, please cut off the power to check whether the beaker stable, location. In the meantime, please test whether the now-used voltage between 110v ±10, otherwise there will be above.
2. Heating time in general should not be too long, intermittent useage can extend the service life.
3. Medium-speed operation can continuously work for 8 hours, high-speed operation can continuously work 4 hours.
4. The suit of machine is equipped with a set of clamps and pillars. a fluorine mixed, a power cord (plug).
Notice
It is manual measurement, there may be 1-2mm error.
Due to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you.
Pictures:
